![]() A good linkage apparantly is that both the “power” and “home” icon on both devices give a “green” light. The test consisted of plugging in 2 devolo boxes on an extension cord so that they are connected via the same socket. Update Ap: received another mail from Devolo to test out the devolo boxes. I now need to reset the AV device about 5 times on a work-from-home day instead of 1 or 2 times. The problem is *less* when the network is stable (ie low usage, mail check and such) but worse when actually *using* the network. Update Ap: I’ve received a new firmware from Devolo to test out, and applied it to all the Devolo AV500 devices I have. It seems to indicate that there is a problem with the amount of data throughput. Update Decem: this problem has kept on appearing intermittently – either after a week or several times a day. I’ll try and keep a count here on how many times I have to restart the devolo plug.Ģ0121125 : reset at least 4 times (doing heavy moving of content to NAS)Ģ0121128 : reset 2 times (telework today, only citrix connection) Update : in the comments on this post people have found an alternate solution : using the devolo management software, you can restart the device remotely, and then it works again (the connection over the powerline keeps working so you can reach the device that way). That does the trick just about every time (sometimes it is the Telenet router that hangs, but that only happens once in a while). ![]() ![]() The only way to solve it is to remove the devolo powerplug (that is downstairs and connected to the router) from the mains, wait 10 seconds or so and reinsert it. Like I’ve suddenly reached a limit on file size or file transfers and everything is cut off. Usually when I’m copying something to the NAS. I have contacted Devolo support, but they only sent me a faq about what to do when you have a slow network connection and how to solve it.īut this is not my problem – everything works fine, at reasonable to very good speeds, when *suddenly* the network connection drops. ![]() Wrong ! Turns out that the firmware update was not the answer – I now have anywhere between 1 and 4 days before I have to pull the devolo plug. In a recent post I wrote about the persistent network problems that I had with my Devolo Powerline and that I solved it. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |